IP09P is a point-to-point 800m long range PoE extender that uses a single ethernet cable (CAT5e, CAT6, CAT7) to transmit PoE signals. IP09P supports IEEE 802.3 at, 802.3 af, 802.3 bt standard and provides up to 90W of power for a remote PoE device, which is ideal for a professional CCTV system to connect a remote PoE camera to a PoE switch in a plug-and-play installation.
IP09 series can extend the PoE over CAT5e distance for up to 800m with the highest 100Mbps bandwidth and 120W power. There are different models, including PoE extenders, IP extenders, and 4-port PoE extender switches to satisfy your different extension needs. You can connect your point-to-point devices with IP09PT/R, use a 4-port PoE extender to connect several remote devices, or combine these models for needs in different scenarios.
IP09P, IP09PH, IP09
Our IP09PT/R PoE extender supports the IEEE 802.3bt standard for your single PoE camera to transmit PoE signals to a maximum of 800m. The 4-port PoE extender IP09PH supports IEEE 802.3at, which can transmit enough power supply for up to 4 PoE cameras.
You can also combine different IP09 series models at TX and RX to build a custom PoE extension system. Please refer to the below table for the combination of different TX (IP09PT/IP09PH) and RX (IP09PR/IP09) and their performance.
Based on your project requirement, you can choose a preferable way to provide power for PDs.
The power supply source can be from IP09PT, the PoE switch, or IP09PR. If you supply power at TX or RX, you can use a non-PoE switch to connect your devices, which is ideal for an outdoor, long-range CCTV system.
If you need a point-to-point PoE extension, you can choose our IP09PT and IP09PR to transmit the signals from a remote camera to your device.
Use IP09PH and IP09PR to extend 4 PoE signals over an Ethernet cable, saving your time and cost for the installation.
Use IP09PH/ IP09PT and IP09 for long-distance, high-power, and high-bandwidth transmission.
IP09 series also has a coaxial version that allows you to upgrade CCTV cameras from analog to PoE cameras without replacing the existing coaxial cables. Click the button below to explore how it considerably saves your time and budget.
Built-in multiple LED indicators for installers to instantly identify the current connection status and take necessary adjustments.
IP09 series is a mountable gadget that can be fixed on a wall or a platform.
We provide detailed test reports that can help you customize solutions for projects.
