SwiftSync 4K HDMI® CAT5e/6 Extender CAT5e 120M/CAT6 140M

Fl.1, L0.04, Docklands Saigon, St. No 1, Tan My, HCMC, VN
sales@feiteng-international.com
Consulting hotline
081.98.96.156

SwiftSync 4K HDMI® CAT5e/6 Extender CAT5e 120M/CAT6 140M

  • SwiftSync 4K HDMI® CAT5e/6 Extender CAT5e 120M/CAT6 140M

  • Product code: HE03-4K
  • Contact
  • Description:
    • Resolution up to 4K@30Hz 4:4:4.
    • Signal extension up to 120M over CAT5e, 140M over CAT6.
    • Workable with SR01X (IP repeater) for long distance transmission.
    • Workable with Ethernet switch for signal distribution
-
+

HE03-4K is a 4K HDMI® extender that applies AV over IP technology to turn a 4K@30Hz 4:4:4 HDMI® signal into network packets, allowing you to use a cost-effective Ethernet cable to send the signal for up to 140M. It can work with Ethernet switches to split an HDMI® to multiple endpoints, which can display one HDMI® source on multiple displays simultaneously. Except for network switches, the extender can use chainable HDMI® receivers (HE03LR-4K) to perform the daisy chain function for up to 250 HDMI® distributions.

 

 

4K HDMI® over Cat5e Extender Splitter

IP technology not only breaks through the limitations of the original audiovisual distance but can be used in conjunction with network switches as an expansion option for network-based distribution systems.

 

HDMI® to IP Network Extender

HDMI® over Cat6/Cat5e

SC&T HE03-4K HDMI® Extender can convert HDMI® signals into IP and transmit the signals over a network cable, with resolutions up to 4K@30Hz. Extended distance can be up to 140m using Cat6 cables.

 

Distribution via a Network Switch

By connecting HE03T-4K to a network switch, you can transmit the source audio and video to several HE03R-4K units at the other end, achieving distribution and extension functions at once. This setup can be used in various scenarios, such as corporate offices, educational buildings, and shopping malls.

 

EDID Management

HE03-4K supports EDID management; you can configure it via the R-side button, and your source device will automatically adjust its output resolution according to the highest resolution supported by the display.

 

IP Repeaters for Longer Distances

If you need to extend the transmission distance further than HE03-4K has provided, you can use SC&T's Ethernet Repeater SR01X. Each SR01X unit allows you to extend the signals for another 120 meters.

 

HDMI® Extender Daisy Chian Version

HE03L-4K is the daisy-chain version of HE03-4K. The audio and video source is transmitted from HE03T-4K, extended via Cat6 cable to HE03LR-4K, which can directly loop to another HE03LR-4K, creating an HDMI® daisy-chain distribution. You can connect up to 250 units in this manner, achieving a total distance of 2.5 kilometers.

 

HDMI® KVM Remote Control

4K HDMI® KVM Extender over CAT5e

HKM01-4K

  • Resolutions up to 4K 30Hz 4:4:4.
  • Signal extension up to 120M over CAT5e, 140M over CAT6.
  • 60KM over single-mode fiber optic.
  • Built-in local loop out for an extra HDMI® display at TX.
  • Built-in 4 USB ports at RX unit.
  • Supports bi-directional analog audio transmission for microphones and headphones.
  • Supports IR, RS232 transmission, and EDID management

 

1G SwiftSync Technology

SwiftSync is a high-efficiency HDMI® transmission technology that offers a cost-effective alternative to uncompressed HDBaseT. With advanced 1G compression, it supports 4K@60Hz and keeps latency under 2 frames (0.03 seconds) —near real-time with no visible delay.

 

Transmission
Technology
HDBaseT 1G SwiftSync H.265
Resolution 4K30Hz / 4K60Hz
Latency 0 ms 4K30Hz: 0 ms
4K60Hz: ~40 ms
4K30Hz: ~40 ms
4K60Hz: ~80 ms
Image Compression None No visible difference High
Stutter / Artifacts None None Present
Cabling CAT6a
(HDBaseT-certified)
CAT5e CAT5e

 

Related Products

0