|
Specification |
|
|
Model |
FT-5.6TFT |
|
Network Camera Protocol |
ONVIF、RTSP、RTP |
|
Network Camera Image Test |
H.264/H.265 decoding, support 4K@30FPS, local zoom preview (at 8 levels). |
|
Interface |
Single port RJ-45 Ethernet. |
|
PoE |
The tester receives the power. 802.3af. |
|
Analog Video Test |
NTSC / PAL / HD-CV I/ AHD / HD-TVI |
|
Analog Video Input |
Video IN BNC input. |
|
Analog Video Output |
Video OUT BNC output. |
|
Analog Video Signal |
1 Vp-p |
|
Analog signal Generator |
Sending PAL / NTSC video test signal, sending CVI, AHD and TVI video test signal.(720P/1080P). |
|
Audio Test |
1 x Audio signal input. |
|
Coaxial PTZ Communication Interface |
Video IN BNC interface |
|
Coaxial PTZ Communication Protocol |
CVI protocol (dahua coax), AHD protocol (Pelco c) and TVI protocol (Hikvision) More than 30 protocols, including Pelco-D/P, Samsung, Panasonic, Lilin and Yaan. |
|
Coaxial PTZ Communication Interface |
RS-485 |
|
Coaxial PTZ Baud Rate |
150, 300, 600, 1200, 2400, 4800, 9600 and 19200bps. |
|
TDR Cable Test |
Testing the length of network cable (4 pairs). Resolution: 0.1 meter; Accuracy: 1 meter. The maximum length of the measured cable is 130-200 meters (depending on the wire rod). |
|
Power Supple |
Input 100V~240V 50/60Hz, Output 12V / 1A |
|
Batter |
Dedicate li-polymer battery 7.4V, user replaceable, capacity 22.2Whwork with a single battery). |
|
Charging |
Charging time: 6~8 hours. |
|
Display Screen |
4.0inch TFT 800*RGB*480(WVGA) resolution，16.7M color，back light level adjustable. |
|
Automatic Standby |
5-60 minutes. |
|
Keyboard Tone |
Enabled / Disabled |
|
Operating Temperature |
-10°C ~ 55°C |
|
Operating Humidity |
30% ~ 90% |
|
Dimension |
190 × 113 × 37 (mm) |
|
Weight |
0.5kg(device with battery) |
